This new general-purpose dispenser offers excellent value.
Offering all the essential functions of a barrel dispenser in a compact unit, this general-purpose single-component dispenser represents very good value.
- This unit accommodates voltages from 100 to 240 VAC without a transformer, making it ready to use worldwide.
- With a minimum time value of only 0.001 s, this unit handles low-volume dispensing as well as fine control of dispensing time.
- Input/output terminals are provided for interlocking with automated devices such as robots.
- The compact and space-saving design is both portable and lightweight.
| Discharge range | 0.0005ml/shot minimum |
| Barrel capacity | 55, 30, 10, or 5 ml, selectable |
| Power consumption | AC100 - 240V･25W |
| Air supply | 0.5 MPa (Dry air) |
| Pressure rangeTime range | 0.02 - 0.49 MPa |
| Time range | 0.001 - 99.999 seconds |
| Action mode | Timer action (constant volume) - Steady action (continuous) |
| Input | No-voltage or transistor (open collector) contact |
| Output | Open collector contact |
| Weight | 3.0kg |
*Call and consult us for further information or selection of the most effective unit that meets your requirements such as liquid types and viscosities.
SIMILAR PRODUCTS
Nu I/II
The Nu I/II - our flagship model for micro volume discharge is now available in a lineup of NLC-original volumetric (plunger pump) dispensers.
Kappa 5
The "KAPPA Series" is 2-component dispensers for small quantity that have obtained an implicit trust in various industrial fields.
Kappa 5 Dual Servo
The Kappa 5 DUAL SERVO, a variation of the Kappa 5, features dual servo drive and offers improved operability and cost-performance without altering its compactness.
PD Series
A low price enables one dispenser per operator, which improves workability.
TWINFLOW VR-50/100
A high-precision volumetric metering system that dispenses fixed volumes free from the effects of changes in liquid viscosity.
HR-50
This 2-component dispenser operates two posi-load metering pumps using a double-rod air cylinder.
LAMBDA I/II
Pursuit of versatility, high precision, and ease of operation
TRISTAN 50/100
This volumetric metering type posi-load pump contributes to high-precision metering and dispensing since it is not affected by changes in material viscosity.
MP-502
These 2-component mixing dispensers incorporate our original plunger pumps in the metering mechanism, featuring simple design and offering functional enhancement.
MD
Featuring NLC's technology for mixing and dispensing minute amounts of 2-component resins
Mu I
High accuracy dispensing in a range as wide as 0.07 to 7 mL!!
ECOFLOW-R
Volumetrically dispenses two-component acrylic adhesives directly from pails.
eco-DUO 450
The eco-DUO450 is a 2-component constant-flow volumetric discharging device, newly developed by ViscoTec.
Robot dispenser
2-component resins, accurately discharged from the volumetric metering plunger pump and mixed in the static mixer attached to the robot, are applied through the nozzle mounted after the static mixer on the robot.
Vacuum encapsulating systems
For high quality manufacturing, NLC provides custom-made Vacuum encapsulation systems to your requirement.
Posi-load metering pumps 50/100
The mechanism of this dispenser is simple with a metering section below the tank.
DCOP – D
DCOP-D is a dispenser incorporating a dosing valve that opens and closes by air pressure. Liquid dripping can be prevented for accurate operation.
Dispenser for Liquid-filled Tube
Convenient dispensing directly from a tube
Micro plunger pump
This plunger pump, incorporating the volumetric metering system, is capable of discharging small volumes with high precision.
Shuttleflow
The tank for supply is unnecessary. It supplies directly from a material can.!!
Robot dispenser
Resin accurately metered with the volumetric metering plunger pump is applied through a nozzle attached to the robot.
Screw pump dispenser
Provides accurate metering across a wide range of liquid viscosities.
Eco PEN 300/450/600
The eco-PEN 300/450/600, developed by ViscoTec, is a new and innovative constant-volume volumetric dispenser, suitable for micro-volume dispensing of low to medium viscosity liquids in diverse applications.
Liquid discharging valves V series
Designed to be compact and lightweight, the V series is best suited for mounting in close contact with a robot.
Static mixer
Improves mixing work and prevents environmental pollution with chemicals of short pot life or unwashable mixes.
Replacing-type Mixer
New! Eco-friendly mixer that replaces chemicals without requiring washes or solvents
Rotary static mixer unit
This rotary static mixer unit is an innovate type of mixer that combines the advantages of both dynamic and static mixers.
Type S nozzle
Provided with a highly durable stainless steel needle. Accepts 12 needle sizes (25G to 11G) to accommodate dispensing of even very small amounts of low-viscosity liquids.
Type L nozzle
Provided with a highly durable stainless steel needle. Accepts 6 needle sizes (14G to 7G) to accommodate dispensing of even large amounts of high-viscosity liquids.
Syringe nozzle (Full length 48mm)
Low-cost nozzle with stainless-steel needle bonded to polypropylene boss with epoxy resin. Customized for syringe applications.
Syringe nozzle (Full length 30mm)
Syringe nozzle featuring four-winged and doublethreaded boss to ensure a tight connection with the syringe.
Flexible nozzle
Resin nozzle ideal for anaerobic liquids. The resin needle prevents anaerobic liquids from curing within and enables dispensing in narrow spaces without damaging the product.
Taper nozzle
The tapered tube inside the nozzle ensures smooth liquid flow. Ideal for dispensing of medium- and highviscosity liquids.
Precision taper nozzle
The precisely machined one-piece molded nozzle ensures highly accurate dispensing of very small amounts.
Poly nozzle 1/4″
One-piece molded polyethylene nozzle with taperthreaded connector for 1/4 inch pipe. The tapered tube inside the nozzle reduces resistance and allows for high liquid flow.
Resin nozzle for DV
All-resin nozzles: PTFE nozzle for dispensing anaerobic resins, and POM-BC nozzle for dispensing UV curable resins.
Special nozzle
We offer a wide variety of needle sizes and boss types. We can also provide custom-designed nozzles in any shape to meet your requirements.
PT type (Standard Tanks)
This tank is suitable for liquids of low-to-medium viscosity. No tank stand is required. The liquid flows upward and out through the pipe attached to the top plate of the tank when the tank is pressurized with air.
DFAL type (Tanks with Level Gauge)
To indicate the liquid level, the level-detecting rod (linked to a float) provided at the center of the tank rises and falls as the liquid level changes.
EM type (Tanks with Electric Mixer / Bottom Pressure-feed System)
This tank is equipped with an electric mixer.
MPT type (Tank with Manual Mixer)
An affordable tank ideal for low-viscosity liquids.
KPT type (Cartridge Tank)
Two types of cartridge tank are available: one accommodates a 330ml commercial cartridge (KPT-1); the other uses a liquid-filled PP cartridge.
DPT type (with Direct-coupled Valves)
When used with a tank stand, this compact tank can be directly coupled with our dosing valve or flow valve. The result is a convenient installation without piping.
CPT type (Tank for Solvent)
This tank is used just for very low-viscosity liquids such as solvents. Its lightweight structure makes it highly portable.
PRODUCTS
Copyright © NLC Singapore Pte. Ltd. All Rights Reserved.